G&G's All New SR Series Keymod Combat Machine
G&G's constant drive to make high performance, ultra-durable, and afforable airsoft rifles has led to the latest generation of CM16 AEGs, the SR Series Keymod Combat Machines. Everything that made that made the original Combat Machine series some of the best and most ubiquitous rifles on the market and out on the field has been improved upon by G&G. If you're looking to get a rock-solid rifle at great savings, the SR Series Combat Machine is one of the best on the market!
G&G CM16 SRS Series 9" Keymod Airsoft AEG Product Highlights:
- 9" Keymod Free Float Modular Rail System
- Reinforced Ultra-Durable Nylon Fiber Polymer Upper & Lower Receivers
- In-Line MOSFET
- Electronic Trigger Unit capable of 3-Round Burst Firing
- 6-Position Battery Crane Stock with additional AAA/AA/CR123 Battery Storage Integration
- SCAR Style Threaded Muzzle Break
- Ergonomic Motor Grip,
- Thermold High Capacity Magazine,
- Flip Up Front & Rear Sights
- Ambidexterous Magazine Release
SR Series Keymod Rails
This version sports the highly popular Keymod modular rail system. Keymod rails allow for the mounting of all your typical picatinny/weaver compatible accessories such as tactical lights, lasers, foregrips, bipods, and more. What makes them superior to a standard RIS is their ability to be customized to perfectly fit the owner's needs while coming in a far lighter form-factor. Keymod rail sections can be mounted along the sides and bottom, only where the user needs them, and attachments are mounted to those rail sections. This also virtually eliminates the need to buy and use rail covers to protect your hands and gloves from the wear and tear of traditional RIS rails.
Reinforced Ultra-Durable Receivers
The nylon fiber reinforced polymer upper and lower receivers that made for industry defining durability while drastically cutting excess weight and costs have been even further improved by G&G. By adding additional structural reinforcement along the length of the upper receiver and lower receiver magazine well the frame of the rifle has become even more rock solid. They even went as far as to mold the magazine well to provide grip space for operators who hold the rifle high and tight. G&G designed this rifle to truly live up to the name Combat Machine.
Industry-Leading Electronics - The MOSFET & Electronic Trigger Unit
By introducing an in-line MOSFET, a specially designed circuit board that redirects the electrical current directly to the motor, the Combat Machine's internals out-perform and outlast other rifles. The MOSFET improves battery efficiency and flow of electricity, making for faster trigger response, more shots between recharging batteries, higher rate of fire, and virtually eliminating burned out trigger contacts. In addition to all of that, MOSFETs allow for the usage of high performance 7.4v-11.1v Lithium Polymer (LiPO) batteries for the ultimate rate of fire and shooting experience. G&G's Electronic Trigger Unit (ETU) is a high-tech replacement for the standard trigger set that allows for the user to fire in semi-automatic, fully auomatic, or 3 Round Burst modes. Because the G&G included the pre-wired and installed MOSFET and ETU combo, the burst fire mode can easily be enabled or disabled without dismantling or modifying the gun's internals.
Ultimate Multi-Position Utility Crane Stock
The bigger, better version of a crane stock was included on all SR Series Combat Machines. This multi-position crane stock can be adjusted to comfortably fit nearly all shooters for all scenarios. A locking button insures that the stock doesn't unexpectedly move when charging into battle. The crane style allows for nunchuck, crane, and short stick batteries to be stored within. An additional AAA/AA/CR123 battery storage tube can be quickly and easily opened on the fly. A QD-sling mount attachment point is also located near the buttpad. The large buttpad is securely fixed to the stock to prevent loss and is aggresively texutres to prevent slipping while shouldered on the run.
Important Peripherals not to be Overlooked
G&G paid special attention to the details on the SR series as well. Each rifle comes with a unique serial number. The pistol grip that houses the G&G High Torque Motor is G&G's nylon fiber ergonomic grip that provides the best comfort and control. A 300 BB high capacity CMAG-V1 rubberized, ergonomic Thermold magazine was also included. An oversized trigger guard makes shooting this gun even with thick gloves comfortable and easy. Flip up front and adjustable rear sights are an excellent stand-alone sighting system that can also be used with aftermarket optics such as red-dots, holos, and scopes. The SCAR Style threaded flash suppressor can accomodate compatible screw-on mock suppressors as well. Lastly, ambidexterous magazine releases make magazine changes a breeze when the rifle is being shot both right and left-handed.
- 31.9" Long
- 5 Lbs Unloaded
- 8mm Tokyo-Marui Compatible Version 2 Gearbox with In-Line MOSFET & Electronic Trigger Unit (ETU)
- 6.08mm 260mm Inner Barrel
- 360 FPS with 0.20g BBs
- NiMH & LiPO Battery-Ready
- Aluminum Keymod Rail, Nylon Reinforced Polymer Receivers, Stock, Grip.
Note: Battery and Charger Sold Seperately. Product will ship with USA Federally Mandated Orange Tip.
G&G SR Series User Manual