GATE WARFET AEG Control System

view details
SKU:
8130_WAF
UPC:
5904730532181
Shipping:
Calculated at Checkout
¥9,066

Why buy from Airsoft Station?

  • FREE SHIPPINGOn purchases over $149
    (lower 48 states)
  • Returns & WarrantyReturns & Warranty Policy
    for 30 days
  • RAVE reviewsReturns & Warranty Policy
    for 30 days

Download PDF Manual

 

GATE Airsoft's Most Advanced AEG Control System

The GATE WARFET is super easy to install and has 20 unique functions with almost 6 million possible configurations.  This MOSFET actually includes a programming card which makes it very easy to access the settings.  The WARFET features pre-cocking and smart trigger functions which allows the user to achieve a trigger response similar to a real gun.  The unit of course has a programmable burst function (1-5 rounds).  This is very useful in milsim events which require a low cap mag because it can allow you to conserve your ammunition more easily.  Another useful function is the ROF control.  One way you can use the ROF control is when using strong LiPO batteries and wanting to achieve a more realistic rate of fire.  The built in smart fuse protects your AEG and batteries in case your gun becomes jammed, and also prevents deep battery drain.  Many useful functions are built into the WARFET  such as ON/OFF Active Braking, MOSFET, Built-in self test, debouching, and many others.  If you want to take complete control of how your AEG functions, the WARFET is a no-brainer.

Super easy to install, no soldering required!

 

Features:

  • User-friendly configuration via the Tactical Programming Card
  • Sturdy and super-small size AEG Controller
  • Compatibility with the strongest AEG replicas and batteries (ready to work with LiPo 14.8V, 5000 mAh, 60C)
  • Tested with car batteries
  • Super-easy installation - thanks to the Mini-Tamiya adapters, you can connect WARFET to the original (stock) wiring
  • It can work with most built-in MOSFETs
  • With stock wiring, WARFET reduces melting switch assemblies
  • In hardwired installation, WARFET draws the energy from the battery directly to the motor, bypassing the mechanical trigger contacts
  • Resistant to atmospheric conditions (military specifications: MIL-V-173C)
  • Deep-drain protection for 7.4V, 11.1V, 14.8V LiPoly and 9.6V, 12.8V LiFePO4
  • Improves battery life, ROF, spring life and gearbox reliability

 

AEG Controller parameters:

  • Wide range of supply voltage: 3-17V
  • Protection against short-circuits: up to 1000A
  • Incredibly low current consumption on stand-by: 0,2mA
  • Ultra-low resistance: 2mΩ
  • Dimensions: 56x20x9mm
  • Weight: 9,4g

Tactical Programming Card
The outstanding Tactical Programming Card provides you with very easy access to the AEG Controller settings. All you need to do is to connect the Tactical Programming Card between the battery and the Controller. A big advantage is that there is no need to use any additional wires. The AEG Controller can be fitted out of view in your AEG, and you still have easy access to its settings. The Tactical Programming Card communicates with the AEG Controller and displays the most recently saved settings. You can simply change them using three buttons.



Tactical Programming Card parameters:

  • Supply voltage: 5-17V
  • Number of LEDs: 29
  • Number of buttons: 3
  • Dimensions: 67x53x7mm
  • Weight: 27,3g

Kit includes:

  • Tactical Programming Card
  • AEG Controller
  • Battery Mini Tamiya adapter
  • AEG Mini Tamiya adapter
  • Pair of Deans-T Connectors
  • Single Trigger Wire
  • Double Trigger Wire
  • Quickstart Guide

 

Functions:

1-tactical-programming-card.png

TACTICAL PROGRAMMING CARD

The outstanding Tactical Programming Card provides you with very easy access to the AEG Controller settings. All you need to do is connect the Tactical Programming Card between the battery and the Controller.
2-pre-cocking.png

PRE-COCKING

Victory in the game is often a matter of fractions of seconds. Thanks to the PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger response significantly. You can set the time of PRE-COCKING using the Tactical Programming Card. There are two PRE-COCKING MODES:

1)  AUTO MODE – the spring is automatically compressed after each shot,
2)  TRIGGER MODE – the first trigger action compresses the spring, and the second trigger action fires the shot.

Please note: using PRE-COCKING increases wear and tear on the gearbox. PRE-COCKING is designed for SEMI mode. In the AUTO mode, it can result in blank shots.

3-plug-and-play.png

PLUG&PLAY

Super-easy installation, just plug and play. No soldering required. All you need to do is connect the battery and the rifle to the AEG Controller.

4-programmable-burst.png

PROGRAMMABLE BURST

The burst enables you to shoot a pre-determined number of BBs (1-5 rounds), which is very useful in MILSLIM and when using low-caps. You can transform AUTO MODE to BURST MODE or SEMI MODE to BURST MODE*. The Tactical Programming Card allows you to set the burst time. The AEG Controller automatically corrects the burst time according to the voltage level of the battery.

*SEMI to BURST in modified installations only.

6-configurable-fire-selector.png

CONFIGURABLE FIRE SELECTOR

The function gives you the option to program your fire selector. There are five operating modes:

-    STOCK WIRING SEMI/AUTO
-    STOCK WIRING SEMI/BURST
-    MODIFIED WIRING SEMI/AUTO
-    MODIFIED WIRING SEMI/BURST
-    MODIFIED WIRING BURST/AUTO

7-rof-control.png

RATE OF FIRE CONTROL

It enables lossless reduction of the rifle’s rate of fire, so you can use strong LiPo batteries, and still have ROF like in a real gun.
8-smart-trigger.png

SMART TRIGGER

We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response. It works with the ROF Control system. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full rate of fire, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery. The Smart Trigger is most effective when the Burst time is set at 3 rounds.

9-battery-protection.png

BATTERY PROTECTION

Protection against Over-Discharge of the Battery Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, the Controller will not allow firing.

10-smart-fuse.png

SMART FUSE

The new AEG Controller should never let you down on the battlefield. It is the best electronic fuse. The AEG Controller has a true current sensor. A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. If your rifle becomes jammed, the SMART FUSE protects motor and battery against damage. Overheating, overloading or short-circuiting of the electrical system should not damage the Controller.

12-on-off-activebrake.png

ON/OFF ACTIVE BRAKE

The Controller provides you with the opportunity to decide if you want to use the Active Brake function. If you do not need this, you can turn it off easily. It will lead to improving the lifespan of your motor.

13-activebrake.png

ACTIVE BRAKE

Do you care about realism? Would you like to increase the life of the gearbox? Does your rifle have such a high rate of fire that you are not able to make a single shot? The Active Brake sorts things out. In SEMI Mode, the brake does not allow for compressing a piston after a shot. The piston will stop in the front position which eliminates unnecessary stresses, increasing the service life of the gearbox and its parts. This is important, especially with an AEG power upgrade. After releasing the trigger, the rifle immediately stops firing. So, you gain more realism and, additionally, you do not waste your precious ammunition.

14-mosfet.png

MOSFET

Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher rate of fire of the rifle and a faster trigger response, and the contacts are protected against burn out.

15-debouncing.png

DEBOUNCING

This provides full compatibility with the micro-switches. It ensures full resistance to contact bounce (vibration). You gain a bigger ROF, a faster trigger response and your MOSFET is less prone to overheating.

16-built-in-self-test.png

BUILT-IN SELF-TEST

It allows you to quickly check whether the AEG Controller works properly. If you have problems with your AEG, the BUILT-IN SELF-TEST allows you to check that the problem is not caused by the Controller.

17-3rd-gen-mosfet.png

3RD GENERATION MOSFET

The advent of modern transistors and microcontroller has enabled us to create the smallest and most reliable AEG Controller on the market.

18-dark-mode.png

DARK MODE

DARK MODE allows you to turn off the green LED which lights up when a gun is firing. This function is especially useful during night games.

19-coating.png

COATING

Thanks to its special conformal coating, it is resistant to atmospheric conditions (Military Specification MIL-V-173C).

20-14-8-lipo-ready.png

14.8V LI-PO READY

The system can be used with batteries up to 14.8V LI-PO. Minimum operating voltage is 3V and maximum voltage is 17V.

21-hardwired.png

HARDWIRED

In the case of a hardwired installation, the Controller draws the power from the battery directly to the motor, bypassing the mechanical trigger contacts. This requires a modification of the AEG installation.

22-mini-tamiya-ready.png

MINI TAMIYA READY

Thanks to the Mini Tamiya Adapters included in kit, you will be able to smoothly connect WARFET to your original installation.

23-quickstart-guide.png

PRINTED QUICKSTART

It makes easier starting your adventure with WARFET. The quickstart contains basic information and hints.

 

Customer Reviews